Loading... Please wait...

Categories

Our Newsletter


ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT SPICER GREASABLE [HEAVY DUTY SERIES]

  • Image 1
Price:
$439.95
SKU:
ASDJK-1310F-G
Weight:
30.00 LBS
Availability:
Usually ships within 24 to 48 Hours after the order.
Shipping:
$11.00 (Fixed shipping cost)


Product Description

New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Spicer Greasable U-joints Custom made by Adams Driveshaft.

Application: 2007 to 2016 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the front or rear differentials, or transfer case's example [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information and may have to have you get us a measurement.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement.

This Heavy Duty Series Spicer Greasable 1310 CV Driveshaft will work up to 35" Tall Tires after that size we Recommend you upgrading to our [Extreme Duty 1310 Spicer Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

This Item will include the following parts:

[1] 2" X .120 Wall Heavy Duty 1310 CV Driveshaft with Spicer Greasable U-joints, and a flange on it that fits your front end so it is Easier to install. Lifetime Warranty if you twist our Tube or break a Weld.

[1] American Made Front 1310 Transfer Case Output Shaft Yoke.

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install

 

 Step by Step Installation Instructions Link: http://www.adamsdriveshaftoffroad.com/front-jk-install/

jk-front-measurement-copy.jpg              

                   


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Previous | Showing reviews 11-19 of 19

  1. Very well built and excellent service 5 Star Review

    Posted by on 29th Aug 2016

    The driveshaft is great quality and when I called in, the staff were very professional and helpful


  2. Perfect fit 5 Star Review

    Posted by on 19th Jul 2016

    Easy ordering process, Great customer support!!!
    It was simple to install. I have had it up to 90+ and no vibrations from it. I will highly recommend your line of products to everyone.


  3. 2007 JKU Front Drive Shaft 5 Star Review

    Posted by on 19th Jun 2016

    Great product. Thanks for the help ordering you were great to deal with. Product got her faster than I thought it would and looks like a great product. Easy install and no vibrations at all. Now we just need to get out on the trails and make it work. Thanks again and I know that when it is time to replace the rear I will being calling you.


  4. Very easy install 5 Star Review

    Posted by on 12th Apr 2016

    Was very easy to install! I feel much more confident about my jeep jk. A ton more clearance between my drive shaft and exhaust! Thanks for a great product.


  5. Great replacement 5 Star Review

    Posted by on 9th Apr 2016

    Received the driveshaft very quickly after ordering.

    Perfect replacement for my 2007 JKUR. Installation was easy especially after reading the online install instructions. Appears to be built very well.

    Nice free shirt too!


  6. Great service, great products 5 Star Review

    Posted by on 29th Mar 2016

    I put on my front and rear Adam's 1310 driveshafts- my Wrangler Unlimited Rubicon has never driven smoother. These are so much better and stronger than the stock shafts it isn't even funny. Balance is dead on, the Jeep is noticeably smoother at speed. Super fast service too! Would buy again no question.


  7. Great customer service, excellent quality 5 Star Review

    Posted by on 28th Mar 2016

    Called on Monday morning to verify my order over the weekend, and it arrived to my house on Friday, custom made to my JK. Bolted right in perfectly. Went to Moab next day, took 5 trails of technical wheeling, and it performed flawlessly. Will be replacing the the rear DS with Adams, no doubt. Balanced correctly and no vibration. No hype just great construction with top notch customer service.


  8. Great service!! 5 Star Review

    Posted by on 23rd Dec 2015

    The driveshaft was exactly what I needed, and the customer service was great!


  9. Precise construction and simple install 5 Star Review

    Posted by on 15th Jul 2015

    The grease seal on my OE front driveshaft finally blew out and ripped so I bought one of these to accommodate the angle and go to u-joints instead of the CV so it doesn't cause me issues in the future.

    The hardest part of the install was getting the OE bolts out of the connection to the front differential. The factory did a nice job with using thread locker. Once the OE shaft was out, the new Adams shaft fit perfectly! Installed in 10 minutes. So many times with aftermarket equipment is just slightly off making "bolt on" sections challenging to get the bolts to thread. Not this, everything lined up perfectly.

    It comes pre-greased which was nice too. In stalled the shaft and ran down the highway at 70mp 5 minutes later. Note: I thought that I was missing the zirk fitting closest to the CV side when I first inspected the new shaft but it is actually one of the flat fittings to avoid getting knocked off. I called Adams and they clued me into the difference.

    Looking forward to wheeling this weekend with the new shaft. Great product! Great customer service.


Previous | Showing reviews 11-19 of 19