Loading... Please wait...

Categories

Our Newsletter


ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES]

  • ASDJK-1310R-S
  • Image 2
  • ASDJK-1310R-S2D
  • ASDJK-1310R-S4D
RRP:
$659.95
Your Price:
$629.95 (You save $30.00)
SKU:
ASDJK-1310R-S2D, ASDJK-1310R-S4D
Weight:
22.00 LBS
Availability:
Usually ships within 24 to 48 Hours after the order.
Shipping:
Free Shipping


Product Description

New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.

 ***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 

Application:

FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS

2 Door Driveshaft: Part# ASDJK-1310R-S2D  4 Door Driveshaft: Part# ASDJK-1310R-S4D

 

This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep. 

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height. 

Benefits:

  • Made out of 2 1/2" X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Solid U-joints on the Market.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts as Picture up Top:

[1] 2 1/2" X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of Heavy Duty 1310 U-bolts.

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

  

Step by Step Installation Instructions Link: https://www.adamsdriveshaftoffroad.com/rear-jk-install/

 

jk-jl-rear-measurement-chart-2.jpg

                   


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Previous | Showing reviews 11-20 of 51 | Next

  1. Great products 5 Star Review

    Posted by on 24th Aug 2021

    Have 2 JK's, one with model 1310 Extreme, other with 1310 Heavy duty. these things are bullet proof! My wife lives the mantra 'drive it like you stole it' and the DS take what she dishes out. well built and strong. Install it pretty easy, even someone with little skill can install these DS


  2. Beautiful, Strong, Easy to Install 5 Star Review

    Posted by on 4th Jun 2021

    I have installed Adams 1310s on the front and rear of my 2010 Jeep Wrangler. Installing them is EASY. Getting the old ones out - not so much. A 5/16 ratcheting box wrench is very handy for installing the new one. A big puller and a big hammer are necessary to remove the old one. My front yoke nut was 1 1/4 but the back was 1 5/16! Be sure to do your project when the stores are open so you can run and buy tools. Have this video nearby: https://www.youtube.com/watch?v=I6PjDTLCQ3M Wear your Adams T-shirt with pride!


  3. Great improvement 5 Star Review

    Posted by on 25th May 2021

    When my stock driveshaft finally failed I knew I had to go with the best, and it was a breeze to install. No more noise and great feeling I know that I bought American


  4. Repeat customer 5 Star Review

    Posted by on 21st Apr 2021

    I’ve been running my Adam’s front shaft for awhile and it’s been bullet proof. When it was time to upgrade the rear I called the guys on a Monday and had my shaft on Thursday! You can’t beat the support,the service and the shipping times!


  5. Best All the Way Around!!! 5 Star Review

    Posted by on 15th Mar 2021

    Installed in no time. Fast easy ordering and shipping. If you need some tech support in order or not 100% on how to measure or order or have special needs... just call!! So very nice and informative!!! Solid made and yes I’m gonna say it.... CUTE!!!! Love the look!!! Installed Rear driveshaft in my 2009 Jk with a 5” lift rollin on 35’s.


  6. Well Crafted Looks Great Awesome Price 5 Star Review

    Posted by on 10th Feb 2021

    So I now have both front and rear Adams drive shafts up under my 2014 Jeep Wrangler JKU. And I have to say these are the strongest driveline components I have ever installed...This DS is solid, well constructed and can take any abuse you can dish out. Very happy with this purchase and I am already making plans to have them added to my next rig. The quality of craftmanship and attention to detail is beyond 5 stars. Ands the price for such quality really can't be beat. Thank you Team Adams


  7. Well Made! 5 Star Review

    Posted by on 27th Jan 2021

    Great product that screams quality!! I liked the personal touch with the handwritten tag with my name and packages inside the box. Detailed instructions were very appreciated!


  8. Beef 5 Star Review

    Posted by on 13th Jan 2021

    Super impressed with the drive shaft I received. Major up grade from the wimpy oem one . I will definitely be buying from Adams again for both my Jeep’s , and the shipping was fast as heck .


  9. Best damn driveshaft out there!!! 5 Star Review

    Posted by on 24th Oct 2020

    Finally was able to get the rear driveshaft for my 2010 Jeep JK. Already did the front awhile back. I was surprised how quickly it shipped and I received it. Install was easy, except getting the POS stock out of the rear pinion flange. Overall a great product from people who know their stuff and stand behind their products. Proudly wearing my free t-shirt to help promote their products!!!


  10. Amazing Upgrade 5 Star Review

    Posted by on 24th Sep 2020

    Dented my stock drive shaft and needed to replace it, after asking around i finally decided to go with adam's. in the end adams has the best customer service! one amazing looking product as well as performance. so i happy i chose these guys thank you again.


Previous | Showing reviews 11-20 of 51 | Next


Add to Wish List

Click the button below to add the ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES] to your wish list.

You Recently Viewed...