TJ Rear Non Rubicon 1310 CV Driveshaft [Extreme Duty Series]

You are buying a Rear TJ Non Rubicon 1310 [Extreme Duty Series] CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.

Must have an Sye Kit Installed for this Driveshaft to work.

Adams Driveshaft custom makes these driveshaft using only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid U-joints, Long Slip, and use the Strongest castings of Components possible. Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. 

This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

Contents:

[1] Adams Driveshaft 1310 Solid U-joint Extreme Duty Series CV Driveshaft made out of 2 1/2" x.095 D.O.M Tubing.

[4] Brand New Grade 10 CV Bolts with small heads for easy installation.

[1] Free Adams Driveshaft T-Shirt.

Due to many different size of lifts, differentials, belly up's, etc you will need to get us a Center to Center Measurement off of your Jeep. Please e-mail us at sales@adamsdriveshaftoffroad.com the Year, Make, Model, Lift Size, and Measurement or call us at 702-568-5680 between the hours of 8:00am to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. You can use the measurement chart below to measure. Jeep must be at ride height when measured.

Driveshafts come painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov