Adams Driveshaft Forged 1310 Series 1 3/8" x 16 Spline Slip Yoke.
This is one of the Strongest Forged 1310 Slip Yoke that you can use on a 1310 Series CV Driveshafts or Weld Yoke Style Driveshafts. Adams made this slip yoke with a lot of upgrades in mind. We have inset the grease zerk so it won't break off on Rocks, etc. We had the yoke specially machines to take less balancing weight and a better dust cap to help keep out the contaminates. It can used on Front or Rear Driveshafts.
Specs:
This Slip Yoke Measurements are:
- 16 splines and 1.375 inch Spline Diameter.
- 7.875 inches from center of u-joint bearing cap to end of yoke.
Made to Fit a 1310 Series U-joint with the measurements of:
- 3 7/32 inches between snap rings.
- 1 1/16 diameter bearing caps.
Warranty Information
Lifetime Warranty against Breaking due to Torque. If it Breaks due to lack of Maintenance from the u-joint then no Warranty.