Loading... Please wait...

Categories

Our Newsletter


Custom Made Jeep or Buggy Front 1 Ton Axle Swap 1350 CV Driveshafts

  • Picture for reference only (actual parts may vary)
  • Picture for reference only (actual parts may vary)
  • Picture for reference only (actual parts may vary)
  • Picture for reference only (actual parts may vary)
  • Image 5
RRP:
$689.95
Your Price:
$659.95 (You save $30.00)
Weight:
38.00 LBS
Availability:
Usually ships within 24 to 48 Hours after the order. Fixed shipping to the continental U.S. ONLY. For Alaska, Hawaii, U.S. Territories & International orders, there will be additional shipping charges. Please call or e-mail for pricing.
Shipping:
$29.95 (Fixed shipping cost)


Product Description

Build your own 1350 Front CV Driveshaft for those of you who did 1 Ton Axle Swaps, Engine Swaps, Stretches, Atlas T-cases, Etc. 

Bigger tires add more Weight, Traction, and Stress on your Drivetrain Components (Driveshafts, Axles, Gears, Etc), so you want to make sure you are buying the right driveshaft for your Vehicle.

These Driveshafts are made using the Best Components Possible from Spicer and Neapco. We give you the options above to meet your personal offroading demands. Some of these Options are Thicker Tubing for Scraping on Rocks, Component Options like Bigger splines and u-joint series for those of you who do Extreme Wheeling. Basically we are letting you have a say in building your own custom driveshaft.

We have explained the different options for upgrades below:

Tubing: The Heavy Duty (2 1/2" x .095) tubing we use will hold up to most abuse. For EXTREME Wheeling, HUGE Tires, more HORSEPOWER, etc., then you might want to consider upgrading to the thicker (2 1/2" x .120) tubing.  

Slip n Stub: The Heavy Duty (1 3/8" x 16 Full Spline 7") slip n stub we use will hold up to most abuse. For EXTREME Wheeling, HUGE Tires, more horsepower, etc., then you might want to also consider upgrading to the bigger diameter (1 1/2" x 16 Full Spline 8") stub shaft to better handle torque and abuse.

Boot: Although the dust caps we use keep most contaminants from getting inside the slip n stub, if you live in areas that see high amounts of snow, mud, sand, water crossings, etc., then you should consider upgrading the dust cap to a boot. This will also help prolong the life of the male and female splines. ***Please note: As of now, the boot is ONLY available for 1 3/8" diameter stub***1 1/2" diameter stub comes with an upgraded cork sealed dust cap***

If we need any other Information one of our Experienced Staff will give you a call before Custom making the Driveshaft. If have any Questions you can call us at 702-568-5680 between the hours of 8:00am to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You can use these measurements chart below to get the measurement.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

 Click any of the Images Below to Enlarge

1-ton-front-measurement-chart-1-final.jpg    1-ton-front-measurement-chart-2-final.jpg

1-ton-front-measurement-chart-3-final.jpg    1-ton-front-measurement-chart-4-final.jpg

jk-front-measurement-chart-1.jpg

 

 


Write your own product review

Product Reviews

  1. works great and strong 5 Star Review

    Posted by on 14th Apr 2023

    have had the shafts in my 1 ton jku for a year now and have worked great. even getting hit on rocks they are holding up great and still no vibrations. will definitely used adams for future driveshafts


  2. Can’t go wrong with Adam’s! 5 Star Review

    Posted by on 26th Mar 2021

    Was crunched on time. These guys went above and beyond getting my driveshaft out to me (faster then expected). The driveshaft itself is pure beef! Thanks again!


  3. Always amazing quality and fast shipping!! 5 Star Review

    Posted by on 23rd Mar 2021

    I am always amazed at how quickly Adam's get my driveshafts out. I am never in a big hurry but man turnaround is amazing. I have had multiple Adam's Driveshafts on different rigs and they have always held up to abuse. For my current project I went with 1350 and 1410 and have been impressed with the craftsmanship. My biggest reason I keep coming back is because how well the joints hold up after repeated abuse.


  4. American Made Beef!!! 5 Star Review

    Posted by on 24th Jul 2020

    Ordered to the size needed and shipped very quickly. Perfect fit and finish with zero driveline vibrations. GREAT PRODUCT!!!


  5. Best driveshafts for the money 5 Star Review

    Posted by on 6th May 2020

    When my driveshafts came they fit perfect with no issues. Have not had alot of trail time yet.



Add to Wish List

Click the button below to add the Custom Made Jeep or Buggy Front 1 Ton Axle Swap 1350 CV Driveshafts to your wish list.

You Recently Viewed...