Loading... Please wait...


Our Newsletter

Adams Driveshaft's Build your Own - DIY - Offroad Buggy, Jeep Driveshaft, Etc. in 1350 Series

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
19.95 LBS
Usually ships within 24 to 48 Hours after the order. Fixed shipping to the continental U.S. ONLY. For Alaska, Hawaii, U.S. Territories & International orders, there will be additional shipping charges. Please call or e-mail for pricing.
$19.90 (Fixed shipping cost)

Product Description

Build your Own [DIY] Front or Rear Buggy, Rock Crawler, or any other Offroad Driveshaft in 1350 Series. 


For those of you who are building a Buggy, Jeep, Rock Crawler, Ultra 4, KOH Car or any other Offroad Vehicle that is Offroad only and not sure of the Length you need, Clearances, or just want to build your own driveshaft then this is the easiest most Complete Package out there. We have Multiple Option on here for you to choose the Combination you need. Different Tubing Diameters, Thicknesses and U-joint Combinations. 

You have the Option for us to Press, Straighten, and Weld the Tube Yoke in so you would just have to cut the tube to Length and install the stub shaft like the picture above shows, or you can do both ends yourself. These kits work good for people who don't know how much travel they have until they cycle the suspension for Bump, Extended and Ride Height.


This Kit would come with the Following Parts:

  • 1350 Series Forged Weld Yoke.
  • 7"x 1 1/2"x 16 Full Spline Hardened Stub Shaft. Others use a stub shaft with only 3" of spline.
  • Adams Driveshaft Forged 1350 Slip Yoke with a 35 Degree Angle.


We also have Forged Pinion Yokes, Atlas Yokes and Flanges, and Multiple Transfer case yokes and Flanges. Yokes are made in the U.S.A and have a Lifetime Warranty on them.

Write your own product review

Product Reviews

  1. Just what I needed 5 Star Review

    Posted by on 10th Jan 2024

    This driveshaft kit worked out perfectly. It's a tight fit so I'd recommend warming the tubing and freezing the stub shaft. I can't believe how fast it was shipped out.

Add to Wish List

Click the button below to add the Adams Driveshaft's Build your Own - DIY - Offroad Buggy, Jeep Driveshaft, Etc. in 1350 Series to your wish list.

You Recently Viewed...