Loading... Please wait...


Our Newsletter


  • Image 1
  • Image 2
  • Image 3
30.00 LBS
Usually ships within 24 to 48 Hours after the order.
Free Shipping

Product Description

New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints with a Front American Made Pinion yoke.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 



Front Driveshaft Part# ASDJK-1310F-S2Y

This Front Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tires after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Non Greaseable Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.


  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Non Greaseable U-joints on the Market.
  • Comes with an American made Heavy Duty Front Pinion Yoke with Heavy Duty 1310 U-bolts.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.

This Item will include the following parts as Picture up Top:

[1] 1310 2" X .120 Wall Rock Crawler CV Driveshaft with Solid U-joints. Lifetime Warranty if you twist our Tube or break a Weld.

[1] American Made Front 1310 Transfer Case Output Shaft Yoke.

[1] American Made Front Dana 30 or Dana 44 Pinion Yoke.

[1] Set of Heavy Duty U-bolts for front pinion yoke.

[1] Set of 4 Grade 10 CV Bolts.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


Installation Instructions Link: https://www.adamsdriveshaftoffroad.com/front-jk-install/






Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Showing reviews 1-10 of 12 | Next

  1. Excellent quality, easy install 5 Star Review

    Posted by on 22nd Aug 2019

    This is an excellent product for serious off-roading. Just the attention to detail of the drive-shaft is enough to inspire confidence. Add to the fact that it easily clears the JK exhaust at full droop for any lift over ~2.5", and this becomes a must have product.

    The only complaint I have is the same one posted by Andrew - The instructions are not complete if you are replacing the yokes at both ends of the shaft. As Andrew pointed out, you can review the instructions for the rear drive shaft install to get what you need. The only difference being that the center nut is a 1 1/8 socket, not the 1 5/16 listed in the rear instructions (at least that's the case for the '15 JKU).

  2. Well Built! Highly recommend! 5 Star Review

    Posted by on 23rd Jul 2019

    This is the best driveshaft for off-roading. The stock one on my JKU in hard flex hit the exhaust, they designed this one to not hit. I would recommend this driveshaft to anyone!

  3. Driveline 5 Star Review

    Posted by on 1st May 2018

    So far,so good. Parts arrived well packed, with a link video for installation. Easy install, and is a great improvement over the stock,non-serviceable JK driveline.

  4. Great Product! 5 Star Review

    Posted by on 23rd Oct 2017

    Bought this to replace my stock DS on my lifted Rubi that I wasn't able to use the sway bar disconnect on because it was hitting the pipe. The DS not only clears, but confidently handles the extreme angles. The DS came well-packaged and arrived quickly (in less than a week). I highly recommend Adams.

  5. High quality and great customer service 5 Star Review

    Posted by on 5th Apr 2017

    I received my 1310 driveshaft very quickly. All the items were packed very well, and it was in perfect shape when I received it. I did have to call and change the shipping address. It was an easy fix. Also, I really like the fact that Adams sent a t-shirt, most companies don't do that. I will definitely be order a rear 1310 drive shaft from them soon.

  6. Very Well Built!!! 5 Star Review

    Posted by on 25th Jan 2017

    Very well built, took away all vibration I was having with stock drive shaft. It was a pleasure dealing with Adams! Will definitely be purchasing rear drive shaft in the future from Adams.

  7. Great quality and fast shipping 5 Star Review

    Posted by on 21st Jan 2017

    Ordered my front shaft Friday before MLK Monday and received it Wednesday.
    Great quality shaft and yolks easy to install. Even got a free tshirt and sticker.

  8. Great product and quality is amazing 5 Star Review

    Posted by on 8th Jul 2015

    This is a great piece and quality made. My only suggestion is to include or offer a more full instructional guide to installation of front drive shaft on a JK for the version that I purchased, which is the one with both pinion and transfer case yoke replacements. I when I watched the rear install video I saw how to do the front. Also, with the pinion end joint the end caps of that joint are taped on with electrical tape and I learned the hard what that these come off and if the little bearings in there come out then you are in trouble. Ultimately I am very impressed with this product and I will be buying all my future shafts from Adams because the quality is that good, it just took me a little longer to install because I had not ever worked on a driveshaft before. Great product and thanks again ADAMS DRIVESHAFTS!

  9. Solid 5 Star Review

    Posted by on 8th Apr 2014

    I'm very pleased with my driveshaft. You can tell instantly that it's a quality part as soon as you get it in your hands. It took less than an hour to install, and looks great. I just road tested it on a trip to NC from Fl, and took it offroading in multiple places, including Durhamtown Tellico OHV Park, and Beasley Knob OHV. No issues whatsoever. Thanks for the great product, great customer service, and fast shipping.

  10. Very nice. 5 Star Review

    Posted by on 4th Sep 2013

    Shipped fast. Communication was excellent. The driveshaft is very well built. Seems heavier than some competitors, which I think is a good thing. Have driven at sustained high speed and smooth as the factory shaft if not smoother. No vibrations that weren't there before.

Showing reviews 1-10 of 12 | Next