Loading... Please wait...

Categories

Our Newsletter


ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT GREASABLE U-JOINTS [HEAVY DUTY SERIES]

  • Image 1
  • Image 2
  • ASDJK-1310R-G2D
  • ASDJK-1310R-G4D
RRP:
$659.95
Your Price:
$629.95 (You save $30.00)
SKU:
ASDJK-1310R-G2D, ASDJK-1310R-G4D
Weight:
30.00 LBS
Shipping:
Free Shipping


Product Description

New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 

Application:

FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.

This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep. 

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.

Benefits:

  • 2 Door Driveshaft: Part# ASDJK-1310R-G2D  4 Door Driveshaft: Part# ASDJK-1310R-G4D
  • Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Greaseable U-joints not Offshore U-joints with different color Seals.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts as Picture up Top:

[1] 2 1/2" X .083 Wall Heavy Duty 1310 CV Driveshaft with Greasable U-joints.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of Heavy Duty 1310 U-bolts.

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

Step by Step Installation Instructions Link: https://www.adamsdriveshaftoffroad.com/rear-jk-install/

                 

jk-jl-rear-measurement-chart-2.jpg

                   

           


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Showing reviews 1-10 of 19 | Next

  1. Worth the money 5 Star Review

    Posted by on 16th Aug 2022

    We purchased the Adam’s driveshaft to realign the angle of or pinion gear and stop the Jeep Wrangler from shacking you to death. We have a 4.5 inch lift with 40 inch STT Pros tires and ever since went to 40” tires we started receiving a bad shack once my Jeep hit 50 miles an hour. After installing the Adam’s driveshaft, I no longer have the shack and the quality is amazing.


  2. Just installed. 5 Star Review

    Posted by on 5th Aug 2022

    I had my mechanic install this kit. He said the kit was put together with very strong parts. So far, super impressed. Also the oem heavy duty replacement on O'Reilly's website was more expensive.


  3. Quality at its best 5 Star Review

    Posted by on 26th Nov 2021

    Had a lot of chatter and slop coming from my driveshafts and decided to upgrade from the rzeppa style joints to these. Easy install, and eliminated the slop and noise in the driveline. 100% happy! Ps. Anybody that gets to see the underside of your Jeep will certainly be attracted to these.


  4. Great product easy installation 5 Star Review

    Posted by on 15th Sep 2021

    Looks great and performs great


  5. Excellent Driveshaft 5 Star Review

    Posted by on 28th Jul 2021

    Great heavy duty driveshaft and easy to install!! Great service and show quality product!!


  6. great craftsmanship 5 Star Review

    Posted by on 20th Jul 2021

    quick service and easy on installation


  7. Great product 5 Star Review

    Posted by on 6th Nov 2020

    Awesome product, shipped fast. Easy install with the online instructions and Adams has always had great customer service! I’m a repeat customer and will continue to run their brand on my jeeps.


  8. Smooth running addition. 5 Star Review

    Posted by on 21st Jul 2020

    Service was great and a fast turn around after I sent the correct measurements.


  9. Thank you 5 Star Review

    Posted by on 4th Feb 2020

    Second time around with Adams. Awesome support and quality. Want cheap - Family Dollar,
    Want Bullet proof - Buy Adams


  10. Should have replaced sooner 5 Star Review

    Posted by on 21st May 2019

    Just like the title said, I should have replaced my stock with the Adam's drive shaft. This drive shaft is beefier and angles were much better. The stock just couldn't handle the 35s and 3.5 inch lift glad I got an Adam's drive shaft will be replacing the front one soon, cool shirt also!!


Showing reviews 1-10 of 19 | Next


Add to Wish List

Click the button below to add the ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT GREASABLE U-JOINTS [HEAVY DUTY SERIES] to your wish list.

You Recently Viewed...