Loading... Please wait...


Our Newsletter


  • Image 1
  • Image 2
  • ASDJK-1310R-G2D
  • ASDJK-1310R-G4D
ASDJK-1310R-G2D, ASDJK-1310R-G4D
30.00 LBS
Free Shipping

Product Description

New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 



This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep. 

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.


  • 2 Door Driveshaft: Part# ASDJK-1310R-G2D  4 Door Driveshaft: Part# ASDJK-1310R-G4D
  • Made out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Greaseable U-joints not Offshore U-joints with different color Seals.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts as Picture up Top:

[1] 2 1/2" X .083 Wall Heavy Duty 1310 CV Driveshaft with Greasable U-joints.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of Heavy Duty 1310 U-bolts.

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


Step by Step Installation Instructions Link: https://www.adamsdriveshaftoffroad.com/rear-jk-install/





Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Previous | Showing reviews 11-16 of 16

  1. Great shaft, quick install 5 Star Review

    Posted by on 15th Mar 2017

    Ordered this shaft and received within 3 or 4 days. Packaged very well to prevent damage. Installed in about 30 minutes. NO VIBRATIONS!

  2. Great product, easy to install, Highly recommended !!!! 5 Star Review

    Posted by on 26th Oct 2016

    This drive shaft for my JK was highly recommended by a very well known shop here in Texas. I am very pleased with the product, easy to install and bolted right up. The customer service i received was excellent.

  3. Adams 1310 Driveshaft for Jeep JKU 5 Star Review

    Posted by on 19th Oct 2016

    In July I damaged the factory unit on the Rubicon and needed a replacement, so I ordered an Adams 1310 unit. Awesome driveshaft, arrived in just a few days after ordering it. The box was well packed, with foam end caps and supports. Ancillary parts and my t-shirt were packaged in a separate box inside. You know, it's the little touches that make a difference, like the paper selection tag/punch ticket on the shaft with my name hand written on it. That stood out to me. The driveshaft was really easy to install. Adams has video links on their webpage that showcase the installation, step by step. It couldn't have been any easier. I'll probably go ahead and change my front soon, not that I really need to but to have the same quality unit as the rear and the option to easily replace U-joints. I highly recommend buying from Adams if you're in the need of a replacement driveshaft.

  4. best directions! 5 Star Review

    Posted by on 24th May 2016

    The install of rear shaft went real smooyh.
    Between the jcr video and online instructions about hour! I have done front and rear and so pleased how everything lined up.

  5. Bolt in Ready 5 Star Review

    Posted by on 18th Apr 2016

    Ordered Sunday afternoon, arrived at my door Friday afternoon. Balanced, painted, greased and custom made to fit my rear JK 2 door. Came with all hardware and two yokes. Perfect fit. I used a 3/4 HD impact with 1 5/16 impact socket to remove rear diff yoke, I retorqued at 160 lbs feet to not overcrush the DANA 44 pre-load sleeve and I was good to go. From my research, Adams is absotively the best driveshaft out there that anyone can install that has the correct tools. My second shaft from them and you can bet I will use them on my next project as they are high quality that I can afford. Oh, they forgot to send my T-shirt ha.

  6. Satisfied customer 5 Star Review

    Posted by on 1st Mar 2016

    I had my rear driveshaft fail on me after a weekend wheeling trip. I was in desperate need of a driveshaft, after several searches in the forums, Adams driveshafts kept on being recommended over and over. Placed my order online and recieved it in 7 days. Installation was straight forward thanks to their online instructions. Upon initial inspection when delivered I was very impressed with the quality of the driveshaft. I will not hesitate to order from them again. Going to be ordering the front driveshaft from Adams for sure.

Previous | Showing reviews 11-16 of 16