Loading... Please wait...


Our Newsletter


  • ASDJK-1350F-G - Front & ASDJK-1350R-G2D - 2 Door Rear
  • ASDJK-1350F-G - Front
  • ASDJK-1350R-G4D - 4 Door
  • ASDJK-1350R-G2D - 2 Door
  • ASDJK-1350F-G - Front & ASDJK-1350R-S4D - 4 Door Rear
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
Your Price:
$1,489.90 (You save $60.00)
ASDJK-1350F-G & ASDJK1350R-G
60.00 LBS
Usually ships within 24 to 48 Hours after the order.
Free Shipping

Product Description

New Front and Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft. 

Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 4" Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example: [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information after you have ordered.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5", have installed a different T-case, or a Different Differential we will need you to get us a measurement. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement. 

This Heavy Duty Greasable 1350 CV Driveshaft will work up to 40" Tall Tires. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so if you plan on Beating the Hell out of the Jeep then Our Severe Duty 1350 Series with Solid U-joints are the Strongest Made and your best bet.

Although we offer Heavy Duty series greasable u-joints in our 1350 series driveshafts, our opinion is that the solid Extreme Duty series are a better choice for a few different reasons. 

-Strength: Solid u-joints are NOT cross drilled (hollow in the middle), so they are much stronger than greasables.

-Reliability/Dependability: Greasable u-joints are not completely sealed, so contaminants from elements (water, dirt, etc) can get into the u-joint and significantly reduce it's life.

-Balancing: Solid u-joints require less weights to balance due to the tighter tolerances when being manufactured.

To Upgrade to solids, click the link below:  


This Item will include the following parts:

[1] 1350 Greasable U-joint 2 1/2"  X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.

[1] 1350 Greasable U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.

[1] 1350 Front Transfer Case Output Shaft Yoke.

[1] 1350 Front Dana 44 Pinion Yoke.

[1] 1350 Rear Transfer Case Output Shaft Flange Yoke.

[1] 1350 Rear Dana 44 Pinion Yoke.

[2] Set of 1350 U-bolts.

[1] Set of Grade 10 CV Bolts. There is Eight bolts with small heads so they are easier to install.

Driveshafts come painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


jk-jl-front-measurement-chart-1.jpg       jk-jl-rear-measurement-chart-2.jpg



Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

Other Details

Part #:

Write your own product review

Product Reviews

  1. Fantastic Driveshaft !!!! 5 Star Review

    Posted by on 29th May 2020

    Well worth price and the install is easy to do. I was have strange vibration and noise no any longer nice and smooth...

    Highly recommend the product!!!

  2. No nonsense 5 Star Review

    Posted by on 1st Aug 2017

    This shaft kit means business instructions are direct and clear took about 1 1/2 hrs


    Posted by on 30th Jun 2017

    Order my driveshaft and got them in no time at all. customer support is super easy to deal with and fast at getting your problem solved!!

  4. The Best Driveshaft 5 Star Review

    Posted by on 2nd May 2017

    I have a 2016 rubicon unlimited with a 3.5in lift. I put in the front and rear shafts and they are running smooth i felt no vibrations at 75mph. If you wheel you jeep upgrade now or upgrade later. the delivery was within days and free.

  5. Night & Day 5 Star Review

    Posted by on 14th Mar 2017

    HUGE difference in just the daily driving aspect. You never realize how much viberation and noise your driveshafts give off when they're messed up. The quality and pride is evident in their product. I will always recommend Adam's Drivshafts!!!!

Add to Wish List

Click the button below to add the ADAMS DRIVESHAFT JK FRONT & REAR 1350 CV DRIVESHAFT PACKAGE [HEAVY DUTY SERIES] with GREASABLE U-JOINTS to your wish list.

You Recently Viewed...