Adams Driveshaft and Off Road

New Front Extreme Duty Jeep JT Gladiator Sport 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams

Now that you own the Newest Generation Jeep Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential or Axle Kit that Eliminates the [FAD] front axle disconnect and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles. NOT FOR 392 MODELS. If you have a 392, please call us.

Application:

FITS A JEEP JT Gladiator Sport. 

This OEM Flange Extreme Duty Series Solid 1310 CV Driveshaft will work up to 35" Tall Tires, after that size we recommend upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the Strongest driveshaft for your Jeep. This Driveshaft will work up to a 4 1/2" Lift after that the angle may be too Severe or Bind.

Please enter Your Measurement, Year, Make, Model, and Lift Size in the notes when you check out, you can e-mail us, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.

Benefits of Buying an Adams Driveshaft: 

• Front Driveshaft Part# ASDJT-1310F-S-OEM-SP
• Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
• Has Long Full Spline Slip n Stub unlike some of our Competitors.
• Built only with Components made by Spicer and Neapco.
• Has the Strongest Solid Non Greasable U-joints on the Market.
• Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't Disturb the Crush Sleeve.
• Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors comes with Grade 8.

This Item will include the following parts as Pictured up Top:

[1] 2" X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or Break a U-joint in half due to Torque.

[1] American Made Front 1310 Transfer Case Output Shaft Yoke.

[4] Grade 10 CV bolts.

[1] Adams Driveshaft T-Shirt.

Driveshafts come painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

WE WILL NEED A MEASUREMENT LIKE THE PICTURE BELOW SHOWS WITH THE JEEP SITTING AT RIDE HEIGHT.