LJ RUBICON REAR 1310 CV Driveshaft with 1330 Rear Pinion [EXTREME DUTY SERIES]

LJ RUBICON REAR 1310 CV Driveshaft with 1330 Rear Pinion [EXTREME DUTY SERIES]

$399.95

Adams Driveshaft SKU: ASDLJ-1310CVR-SRUB-1

Add $150.00 more for FREE shipping!

You are Buying a Rear [Extreme Duty Series] 1310 series CV Driveshaft with Solid U-joints for a LJ Rubicon made by Adams Driveshaft the Industry leader in Custom made Driveshafts.

Description:
Adams Driveshaft custom makes these driveshaft using only the best components made by two American Companies Spicer and Neapco. We Start out installing the Strongest made Solid U-joints, Strongest CV Flange, and the Strongest castings of Components possible. Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our welds and Tubing if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible without any issues at all.
 

Due to different sizes of Lifts, Belly Up's, and Stretches, we will need you to give us a Flat to Center measurement off of your LJ. We have attached a measurement chart below that shows you how to measure. Please measure with the Jeep sitting on the ground at Ride Height.

If you have any questions please send us a E-mail at sales@adamsdriveshaftoffroad.com or call us at 702-568-5680 between the hours of 8:00 to 5:00 Pacific Time Monday thru Friday.

Components:

[1] Extreme Duty Solid U-joint 1310 CV and 1330 Rear Driveshaft. 

[1] You will also receive an Adams Driveshaft T-shirt with your purchase.



Driveshafts come painted Gloss Black Show Quality.
CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if you break due to torque. No warranty if components break due to bad angles. U-joint and CV Kit are wear Items and should be greased about every three months or three thousand mile which ever comes first. No warranty if u-joints are not maintained properly.