You are buying a Rear YJ 1310 [Extreme Duty Series] CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part# ASDYJ-1310CVR-S
Must have a Yoke Style Sye Kit Installed for this Driveshaft to work.
Adams Driveshaft custom makes these driveshaft using only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid Non Greasable U-joints, Long Slip n Stub, and use the Strongest castings of Components possible. Then we use D.O.M tubing that we back up with a Lifetime Warranty if you can possibly twist it by Torque or Break our Welds.
This Extreme Duty Series 1310 CV Solid Non Greasable will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Solid 1350 Severe Duty Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
[1] Adams Driveshaft 1310 Solid Non Greasable U-joints Xtreme Duty Series CV Driveshaft made out of 2" x.120 Wall Tubing.
[4] Brand New Grade 10 CV Bolts with small heads for easy installation.
[1] Free Adams Driveshaft T-Shirt.
Driveshafts come painted Gloss Black Show Quality.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
We do know most of the measurements already but Due to many different size of lifts, differentials, belly up's, etc you may need to get us a Center to Center Measurement off of your Jeep. Please e-mail us at sales@adamsdriveshaftoffroad.com the Year, Make, Model, and Lift Size or call us at 702-568-5680 between the hours of 8:00 to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. If we need you to measure there is a chart below showing you where to measure from.
Posted by zach mccutchan on 22nd Jun 2018
Great product super heavy duty excellent welds and finish and they hooked up a bad ass t shirt.
Posted by Unknown on 9th Jun 2018
I needed a new driveshaft to replace a broken one on my YJ. A local shop wanted $450 to build a new one plus 1 week to do it. One call to Adam's answered all my questions. Was ordered on Thursday shipped on Friday and in my jeep on Saturday. All for 150 less than local..... thank you Adam's!
Posted by Tom W. on 13th May 2018
I was worried about ordering from Adams at first. They were the cheapest as far as cost goes. I was on a very tight budget and after researching as many other companies as I could find I finally ordered from Adams. I put in a ford 8.8 in my 94 YJ and needed the driveshaft a custom length, 16 3/4". The shaft was made, shipped, and at my door within 5 days if I remember right. I checked out the driveshaft and holy smokes, this thing is made like a sledgehammer. Adams Driveshaft even made it with 7" of spline travel. 2" collapse to 2" extended from my measurement, AND, 3 more inches on the spline incase I lift my jeep any more. I think if my jeep ever takes a hit from a 500lb bomb, my Adams Driveshaft complete with decal will be the only remaining part! Thank you Adams.
Posted by Matt Thompson on 10th Nov 2016
I purchased a front CV driveshaft from Adams and had a good experience so when it came time to replace the rear driveshaft I knew who to call. I had a few questions before purchasing my new rear driveshaft and when I called Adams I was surprised to speak directly with the owner, James. He was very helpful and made some suggestions about dialing in my pinion angle and recommended their Extreme Duty shaft with solid U-joints. After measuring my driveline I ordered online and received my new driveshaft a few days later... all in all a great experience.