Loading... Please wait...

Categories

Our Newsletter


ADAMS DRIVESHAFT JK REAR 1350 CV DRIVESHAFT GREASABLE U-JOINT [HEAVY DUTY SERIES]

  • Image 1
  • Image 2
  • Image 3
Price:
$689.95
SKU:
ASDJK-1350R-G
Weight:
30.00 LBS
Availability:
Usually ships within 24 to 48 Hours after the order.
Shipping:
Free Shipping


Product Description

New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft. 

Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example [Dyna track 60 or Atlas] we can accommodate you. We will just need to know this Information after you have ordered.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please e-mail us, the Year, Make, Model, Lift Size, and T-Shirt Size or call us at 702-568-5680 between the hours of 8:00 to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement. 

This Heavy Duty Greasable 1350 CV Driveshaft will work up to 40" Tall Tire's. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so if you plan on Beating the Hell out of the Jeep then Our Severe Duty 1350 Series with Solid U-joints are the Strongest Made and your best bet.

Although we offer Heavy Duty series greasable u-joints in our 1350 series driveshafts, our opinion is that the solid Extreme Duty series are a better choice for a few different reasons. 

-Strength: Solid u-joints are NOT cross drilled (hollow in the middle), so they are much stronger than greasables.
-Reliability/Dependability: Greasable u-joints are not completely sealed, so contaminants from elements (water, dirt, etc) can get into the u-joint and significantly reduce it's life.
-Balancing: Solid u-joints require less weights to balance due to the tighter tolerances when being manufactured.

To Upgrade to solids, click the link below:  

SOLID U-JOINTS UPGRADE

This Item will include the following parts:

[1] 1350 Greasable U-joint 2 1/2"  X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Weld due to Torque.

[1] 1350 Rear Transfer Case Output Shaft Flange Yoke.

[1] 1350 Rear Dana 44 Pinion Yoke.

[1] Set of 1350 U-bolts.

[1] Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.

 

jk-jl-rear-measurement-chart-2.jpg  

                  

 


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

  1. 1350 CV rear driveshaft 5 Star Review

    Posted by on 28th Jan 2017

    Installed the 1350 CV rear drive shaft today. Looks like a quality unit. Installation was easy. Yokes for both the pinion and transfer case look like high quality units. Well worth the price. Will test the unit next week on a 4 wheel run.


  2. Great product. 5 Star Review

    Posted by on 5th Jan 2017

    This is a great product and well worth the price. The costumer service is great they go above verage to help answer any questions that you have. The quality of wprk in this product is well above average. I would recommend this to anyone.