Neapco Forged 3-3-8081kx 1350 Series Slip Yoke for a 1 1/2" x 16 Spline Stub

Neapco FORGED 1350 Series 1 1/2" x 16 Spline High Angle Slip Yoke. 

This FORGED Slip Yoke is One of the Strongest 1350 Series Slip Yoke on the Market and can used on Front or Rear 1350 Series Driveshafts that have a 1 1/2" x 16 Spline Stub Shaft.

Specs:

This Slip Yoke Measurements are:

• 16 splines and 1.5 inch Spline Diameter.
• 8.44 inches from center of u-joint bearing cap to end of the yoke. 
• Gives you a 35 Degree Angle unlike others that give you 20 Degree.
• Longer than most other Slip Yokes by 1".

Made to Fit a 1350 Series U-joint with the measurements of:

      .   3-5/8 inches between snap rings

      .   1-3/16 diameter bearing caps