Loading... Please wait...

Categories

Our Newsletter


Custom Made Jeep or Buggy Rear 1 Ton Axle Swap 1350 or 1410 CV Driveshafts

  • Image 1
  • Image 2
  • Image 3
  • Image 4
RRP:
$565.95
Your Price:
$533.00 (You save $32.95)
Weight:
40.00 LBS
Availability:
Usually ships within 24 to 48 Hours after the order. Fixed shipping to the continental U.S. ONLY. For Alaska, Hawaii, U.S. Territories & International orders, there will be additional shipping charges. Please call or e-mail for pricing.
Shipping:
$29.95 (Fixed shipping cost)


Product Description

Build your own 1350 or 1410 Rear CV Driveshaft for those of you who did 1 Ton Axle Swaps, Engine Swaps, Stretches, Atlas T-cases, Etc. 

Bigger tires add more Weight, Traction, and Stress on your Drivetrain Components (Driveshafts, Axles, Gears, Etc), so you want to make sure you are buying the right driveshaft for your Vehicle.

These Driveshafts are made using the Best Components Possible from Spicer and Neapco. We give you the options above to meet your personal offroading demands. Some of these Options are Thicker Tubing for Scraping on Rocks, Component Options like Bigger splines and u-joint series for those of you who do Extreme Wheeling. Basically we are letting you have a say in building your own custom driveshaft.

We have explained the different options for upgrades below:

Tubing: The Heavy Duty (2 1/2" x .095) tubing we use will hold up to most abuse. For EXTREME Wheeling, HUGE tires, more HORSEPOWER, etc., then you might want to consider upgrading to the thicker (2 1/2" x .120) tubing. (We can make 2 1/2" x .250 wall tubing, but would be offroad use only and you will need to call due to special pricing).

Slip n Stub: The Heavy Duty (1 3/8" x 16 Full Spline 7") slip n stub we use will hold up to most abuse. For EXTREME Wheeling, HUGE tires, more HORSEPOWER, etc., then you might want to also consider upgrading to the bigger diameter (1 1/2" x 16 Full Spline 8") stub shaft to better handle the torque and abuse.

Boot: Although the dust caps we use keep most contaminants from getting inside the slip n stub, if you live in areas that see high amounts of snow, mud, sand, water crossings, etc., then you should consider upgrading the dust cap to a boot. This will also help prolong the life of the male and female splines. ***Please note: As of now, the boot is ONLY available for 1 3/8" diameter stub***1 1/2" diameter stub comes with an upgraded cork sealed dust cap***

If we need any other Information one of our Experienced Staff will give you a call before Custom making the Driveshaft. If you have any Questions, you can call us at 702-568-5680 between the hours of 8:00am to 5:00pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You can use these measurements chart below to get the measurement. 

Click any of the Images Below to Enlarge

1-ton-rear-measurement-chart-1-final-copy.jpg    1-ton-rear-measurement-chart-2-final-copy.jpg

1-ton-rear-measurement-chart-3-final-copy.jpg    1-ton-rear-measurement-chart-4-final-.jpg

1-ton-rear-measurement-chart-5-final.jpg    1-ton-rear-measurement-chart-6-final.jpg

1-ton-rear-measurement-chart-7-final.jpg

 


Find Similar Products by Tag

1 ton  10.25  10.5  1350  1410  1410 bolt  adams  axle  buggy  chevy  corporate  dana  dana 60  drive  driveline  driveshaft  driveshafts  ford  GM  Jeep  jk  shaft  swap  swaps  tons  

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!