ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES]

New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.

 ***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 

Application:

FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS

2 Door Driveshaft: Part# ASDJK-1310R-S2D  4 Door Driveshaft: Part# ASDJK-1310R-S4D

This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep. 

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height. 

Benefits:

• Made out of 2 1/2" X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
• Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
• Built only with Components made by Spicer and Neapco.
• Has the Strongest Solid U-joints on the Market.
• Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
• Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts as Picture up Top:

[1] 2 1/2" X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of Heavy Duty 1310 U-bolts.

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Warranty Information