Loading... Please wait...


Our Newsletter


  • ASDJK-1310F-S
  • Image 2
  • Image 3
Your Price:
$519.95 (You save $20.00)
28.00 LBS
Usually Ships within 24 Hours
Free Shipping

Product Description

New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through. 



This OEM Front Flange Style Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tires after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Non Greaseable Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement. Please note: If you have a RockKrawler Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.


  • Front Driveshaft Part# ASDJK-1310F-S
  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Non Greaseable U-joints on the Market.
  • Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.


This Item will include the following parts as Pictured up Top:

[1] 2" X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid Non Greasable U-joints, With a OEM Style Flange. Lifetime Warranty if you twist our tube or break a  weld due to Torque.

[1] American Made Front 1310 Transfer Case Output Shaft Yoke.

[4] Grade 10 CV bolts.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


Installation Instructions Link: https://www.adamsdriveshaftoffroad.com/front-jk-install/




Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

Showing reviews 1-10 of 86 | Next

  1. The best of the best! 5 Star Review

    Posted by on 6th Sep 2021

    Perfect fitment, perfect welds,and perfect balance. The only aftermarket driveshaft in my opinion!

  2. Great replacement 5 Star Review

    Posted by on 19th Aug 2021

    Install was so easy. Everything I needed came with the driveshaft and the instructions were easy to follow. Make sure to read exactly what wreches and sockets to have before getting started (especially the 12 point). I had one but it was hiding from me. I used the wrench to get it started but then used a socket to finish, after I found it).

  3. Adams All The Way! 5 Star Review

    Posted by on 4th Aug 2021

    After my front DS finally took its last beating on the rocks it was time to upgrade! Adams was quick... Ordered Tuesday, and at my door on Thursday! The driveshaft is beefy, installation was quick and maintenance is easy as it can be! With the Solid U-Joins I only have to worry about 2 zerks to grease. When my rear finally has had its last good run, I know for sure Adams is what's gonna replace it!

  4. This is the one 5 Star Review

    Posted by on 27th Jul 2021

    If you're looking for something to replace the junk factory rzeppa front driveshaft because the boot has rubbed on the exhaust or just to upgrade this is the one you need, improves the angle so there no more vibration and is way stronger than stock took 30 mins with the right tools

  5. Don’t waste your time with Rzeppa 5 Star Review

    Posted by on 10th Jul 2021

    Fast shipping, high quality shaft, and simple install. So much more reliable than the factory CV. Now, just waiting till my rear shaft makes any noise to justify ordering from Adams again.

  6. Fantastic drive shaft 4 Star Review

    Posted by on 6th Jul 2021

    1st) This drive shaft arrived in less than 1 week from order. Excellent timing for to my pending deployment.
    2nd) Changing from my factory to this was very easy. Spent more time removing the stupid CV joint, than installing the complete new shaft.
    3rd) The quality of this shaft is great and feels very sturdy.
    Can't wait to get this shaft off-road.(in a year or so)

  7. Finally no more Rzeppa CV Joint 5 Star Review

    Posted by on 24th Jun 2021

    After my second Rzeppa, I had it. I should have got the Adams starting off. Now I have no worries and next will be the rear with Adams. Great work and FAST shipping. You have my Jeep's business.

  8. Great Product 5 Star Review

    Posted by on 1st Jun 2021

    Needed to upgrade my front driveshaft on the jk rubicon and the name that came out the most from friends was Adams. Great price and the shaft I got seems top notch so far. Is install and now time to see if we can twist her up.

  9. Wow.... just, wow 5 Star Review

    Posted by on 8th Apr 2021

    Super fast free shipping. It’s just a drive shaft but my driveshaft arrived perfectly packaged and in show quality condition. Truly a perfect piece of engineering that reeks of quality. I wish every parts purchase was this satisfying. Oh yeah and thanks for the t shirt

  10. No more driveline vibration! 5 Star Review

    Posted by on 30th Mar 2021

    I recently re-geared my jeep. 4.10’s to 4.88’s. Ever since the re-gear, the front drive shaft would cause vibrations at about 65mph. Had it balanced twice and adjusted the pinion angle and still had vibration. Frustrated - I decided to replace it with an Adams front drive shaft. Received it in 2 days. Well packaged. Install was simple. Took about 30 minutes. Once installed took it for a spin - brought it up to speed - NO MORE VIBRATION! Wished i had just bought this drive shaft to begin with..

Showing reviews 1-10 of 86 | Next