Loading... Please wait...

Categories

Our Newsletter


ADAMS DRIVESHAFT JT GLADIATOR RUBICON FRONT 1350 CV DRIVESHAFT OEM FLANGE STYLE [EXTREME DUTY SERIES]

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
RRP:
$799.95
Your Price:
$759.95 (You save $40.00)
SKU:
ASDJT-1350HRF-S-OEM-RUB
Weight:
35.00 LBS
Availability:
Usually Ships within 24 to 48 Hours.
Shipping:
$11.00 (Fixed shipping cost)


Product Description

New Front Extreme Duty Jeep JT Gladiator Rubicon 1350 Series Half Round CV Driveshaft with O.E.M Flange on the Front. Custom made by Adams Driveshaft.

Now that you own the Newest Generation JT Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential or Axle Kit that Eliminates the [FAD] front axle disconnect and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles. NOT FOR 392 MODELS. If you have a 392, please call us.

Application:

FITS A JEEP JT GLADIATOR RUBICON ONLY. 

This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 6" Lift after that the angle may be too Severe or it may Bind.

Please enter Your Measurement, Year, Make, Model, Rubicon or NON Rubicon and Lift Size in the notes when you check out, you can e-mail us, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.

Benefits for Buying an Adams Driveshaft: 

  • Front Driveshaft Part# ASDJT-1350HRF-S-OEM-RUB
  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long 1 1/2" Full Spline Slip n Stub unlike our Competitors that use a 1 3/8 Slip n Stub.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
  • Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't Disturb the Crush Sleeve.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.

This Item will include the following parts as Pictured up Top:

[1] 2" X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.

[1] American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.

[4] Grade 10 CV bolts.

[1] Adams Driveshaft T-shirt

Driveshafts come painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

WE WILL NEED A MEASUREMENT LIKE THE PICTURE BELOW SHOWS WITH THE JEEP SITTING AT RIDE HEIGHT.

jl-front-measurement-chart-1.jpg

 


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.

Write your own product review

Product Reviews

  1. Solid construction 5 Star Review

    Posted by on 10th Dec 2020

    very pleased with the quality of my 1350 JT front driveshaft. Best upgrade for your lifted JT.... Great fit and fast shipping!


  2. This thing is Beefy and Beautiful! 5 Star Review

    Posted by on 17th Aug 2020

    First of all, the packaging on this thing is very well done and completely protected the part during shipping. When I unboxed my new 1350 driveshaft from Adams, the quality was immediately apparent. I had purchased one from another manufacturer initially, but returned it to get this one. This thing is BEEFY, and beautiful!(even had a tag w/ my name on it). About to do a 3 1/2 inch lift on my JTR and cannot wait to get this thing on. I will definitely be ordering the rear also.