ADAMS DRIVESHAFT JL FRONT 1350 CV DRIVESHAFT WITH A DANA 60 [EXTREME DUTY SERIES]

$709.95

Adams Driveshaft SKU: ASDJL-1350F-S-D60ULT

Add $150.00 more for FREE shipping!

New Front Extreme Duty Jeep JL Wrangler Rubicon, Sport, Sahara, and 392 Model with a Dana 60 Swap 1350 Series Half Round CV Driveshaft. Custom made by Adams Driveshaft.

Now that you own the Newest Generation Wrangler and Upgraded the Front Differential with a Dana 60 1 Ton, then it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential  and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.

FITS A 2018 - Present JEEP JL WRANGLER 2 or 4 DOOR RUBICON - SAHARA- SPORT MODELS. 

MUST HAVE A 1350 PINION YOKE ON THE DIFFERENTIAL. IF YOU DO NOT HAVE ONE WE CAN SUPPLY YOU A FORGED U-BOLT STYLE DANA 60 YOKE FOR AN EXTRA $79.95

This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4" Lift after that the angle may be too Severe or it may Bind.

 We will need a Center of u-joint to Center of u-joint Measurement like the picture belows shows. Must be measured on the ground at ride height. If you have coil overs then we would need a Collapse, Ride Height, and Full Extension Measurement. You could use the measurement chart below to get the measurement. 

Benefits for Buying an Adams Driveshaft: 

  • Front Driveshaft Part# ASDJL-1350F-S-D60ULT
  • Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Adams Forged Parts, Spicer and Neapco.
  • Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.

This Item will include the following parts as Pictured up Top:

[1] 2" X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.

[1] American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.

[4] Grade 10 CV bolts.

[1] Adams Driveshaft T-shirt

Driveshafts come painted Gloss Black Show Quality.


CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.