Loading... Please wait...

Categories

Our Newsletter


SYE Install

 

Slip Yoke Eliminator Kit Installation Instructions 

 

 

 

center-to-center-measurement.jpg

 

Drive shaft modifications to Original Unit. The modification of your drive shaft should be performed by a local driveline repair shop that is capable of balancing your finished assembly. Note: Use a C.V. joint & a long slip spline style shaft assembly to avoid problems with lifted vehicles. If you wish to have a custom driveshaft fabricated you will need to get your new driveshaft measurement length. Use the measurement procedures listed in the diagram above. Note: for proper C.V. type drive shaft operations, the rear differential yoke should be pointing at the transfer case output yoke. This should be checked under normal driving conditions and load